• General Presentation Flexo printing machine fully servo-motorised. Sleeve technology (for the printing cylinder and anilox cylinder). Heavy duty equipment (frame 38mm); Printing station very accessible for the operator. All functions automatically actionned by the PLC. Possible web width from 430mm to 825mm. • Working area - Dedicated for printing film, flexible packaging and cardboard - Large range of supports from 15µ to 0,3mm - Printing repeat from 12’’ to 32’’, enabling any kind of packaging and different dryers (hot air, IR, UV). • Advantages - Sleeves and anilox installed without special tool reducing the set up time - Easy access of the printing head - Recording of job parameters (easy to re-use) - User friendly central panel PLC gathering all information - Direct view by the operator of the printing web on the press » FPC Servo Technical specifications :   Servo FPC 1650 Servo FPC 2050 Servo FPC 2400 Maxi. Printing web width 16.5’’ (419 mm) 20.5’’ (521 mm) 24’’ (610 mm) Web width 17’’ (432 mm) 21’’ (533 mm) 24.5’’ (622 mm) Max. die cutting width 16.5’’ (419 mm) 20.5’’ (521 mm) 24’’ (610 mm) Printing repeat 12’’à 32’’ (305 mm to 813 mm) 12’’à 32’’ (305 mm to 813 mm) 12’’à 32’’ (305 mm to 813 mm) Die cutting repeat 16’’à 32’’ (406 mm to 813 mm) 16’’à 32’’ (406 mm to 813 mm) 16’’à 32’’ (406 mm to 813 mm) Gear change                               none none none Max. mechanical speed            305 m/mn 305 m/mn 305 m/mn Compressed air 7 bars 7 bars 7 bars Power 480 v 10% 3ph 480 v 10% 3ph 480 v 10% 3ph Frequency 60 Hz 60 Hz 60 Hz Zone description Non  explosive Non  explosive Non  explosive Substrate Film – paper – adhesive support - cardboard Film – paper – adhesive support - cardboard Film – paper – adhesive support - cardboard Thickness Film 15µ to tag 0,3 mm Film 15µ to tag 0,3 mm Film 15µ to tag 0,3 mm Measure unit    metrical metrical metrical Colour grey and red grey and red grey and red   Servo FPC 2800 Servo FPC 3200 Maxi. Printing web width 28’’ (711 mm) 32’’ (813 mm) Web width 28.5’’ (734 mm) 32.5’’ (826 mm) Max. die cutting width 28’’ (711 mm) 32’’ (813 mm) Printing repeat 12’’à 32’’ (305 mm to 813 mm) 12’’à 32’’ (305 mm to 813 mm) Die cutting repeat 16’’à 32’’ (406 mm to 813 mm) 16’’à 32’’ (406 mm to 813 mm) Gear change                               none none Max. mechanical speed            305 m/mn 305 m/mn Compressed air 7 bars 7 bars Power 480 v 10% 3ph 480 v 10% 3ph Frequency 60 Hz 60 Hz Zone description Non  explosive Non  explosive Substrate Film – paper – adhesive support - cardboard Film – paper – adhesive support - cardboard Thickness Film 15µ to tag 0,3 mm Film 15µ to tag 0,3 mm Measure unit    metrical metrical Colour grey and red grey and red Top of the page

• General Presentation Flexo printing machine for high production. New generation machine using servo-motorisation technology. Completely servo-motorised, this equipment enables a perfect registration quality and is totally reliable for any kind of adhesive or non adhesive supports. • Working area This machine is specially designed for the rotative printing and die cutting process of self-adhesive labels, flexible packaging, tags and boards. - Medium and long runs - All kinds of inks :  water based inks, UV inks… - Hot air drying, IR drying and UV drying - Multiple converting solutions in line - A lot of options available : laminating, relam-delam, foil or hologram laying, turn bar… • Advantages - Printing on all supports - Reduced set up time - Significant reduction of waste - Quick change of anilox and printing plate without special tool - Easy to operate - The operator can control from each printing head or from the central panel » ELS Servo 1000  Technical specifications :   10’’ 13’’ 16’’ Web width  260 mm 336 mm 412 mm Maxi printing web width 254 mm 330 mm 406 mm Number printing stations          size until 12 clrs 6’’ to 24’’ until 12 clrs 8’’ to 24’’ Until printing 8’’ to 24’’ Plate cylinder   15.85 mm 19.05 mm 19.05 mm Diam. Anvil cylinder 72.64 mm 72.64 mm 76.64 mm Frame thickness 16 mm 16 mm 16 mm Motorisation servo servo servo Register 360° 360° 360° Die cutting stations 2 2 2 Die cutting width 254 mm 330 mm 406 mm Maxi die cutting width 24’’ 24’’ 24’’ Dia. Counter pressure cylinder 97 mm 97 mm 97 mm Counter pressure cylinder for       Die cutting station 2 2 2 Die cutting frame thickness 19 mm 19 mm 19 mm Unwinding diameter 1 066 mm 1 066 mm 1 066 mm Rewinding diameter 1 066 mm 1 066 mm 1 066 mm Waste rewinding diam.             Optional 610 mm 1 066 mm 610 mm 1 066 mm 610 mm 1 066 mm Waste diam. on rail 1 066 mm 1 066 mm 1 066 mm Unwinder roll lift pneumatical pneumatical pneumatical Power 240 vac 240 vac 240 vac Compressed Air 7 bars 7 bars 7 bars Speed 228 m/mn 228 m/mn 228 m/mn Colour grey and red grey and red grey and red Top of the page

• General Presentation

The SMAG GALAXIE roll to roll silkscreen press was launched to the market in 1995 at Label'Expo Europe 95. To date more than 240 machines have been installed in five continents. Since this launch the GALAXIE has seen several updates and the present third generation shares all the hall marks of its predicessors an indisputed to be the industry standard.

• Advantages of silkscreen over otherprinting methods

- Silkscreen printing as a high resistance both mecanicaly, chemicaly and to uv light.
- Extremely important Opacity
- Very heavy ink deposits
- Providing tactile and sensory effects
- Special ink applications such as Thermocromic, Conductive and Scratch Off


• Objectives

   » Primarily
- Roll to roll printing in single or multiple passes solely silkscreen, to re-register web’s from other processes such as flexo, letterpress, offset, digital print.
- Complete in-line finishing including hot foil stamping, embossing, laminating, waste stripping, slitting and rewinding.

  » Subsequently
- Providing added value and differentiation to labels.

• Advantages

- A very high register accuracy with a simple web path, multiple passes and combination print.
- Low waste during the set up and run.
- Simplified operation.
- Modular to facilitate future expantion and upgrade.
- A complete system including finishing, in line hotfoiling, diecutting and laminating etc.
- Possibility to match the line according to special requirements.
- Full range of formats and web widths.

Number of print stations 1 to 10 Drying Systems U.V. / I.R. / Hot Air Maximum widths 270 mm to 420 mm Maximum print widths 260 mm to 410 mm Maximum print repeats 260 mm to 600 mm Diecutting Formats 260 mm to 600 mm Speed 1500 to 5000 strokes / hour Maximum Unwind Diameter 750 mm Maximum Rewind Diameter 460 mm Register Accuracy (Depending upon substrate) +/- 0,1 mm Electrical requirements 400 V 3 PH + N Compressed air requirements 6 bars 5N/m³/h Conformity CE or UL

	» French » German » Italian » English
	» French » German » Italian » English

Top of the page

• General Presentation

To assist more of our customers to enter the roll screen printing marketplace with a Galaxy press, we have introduced an entry level press the GALAXIE DUO.
It is limited to two configurations and supplied in one web width (260mm).
+ Version 1 : Includes two colours and flat bed die cutting.
+ Version 2 : Includes two colours plus hotfoil stamping and embossing along with flat bed die cutting.

• Advantages of silkscreen over otherprinting methods

- Sikscreen printing as a high resistance both mecanicaly, chemicaly and to uv light
- Extremely important Opacity
- Very heavy ink deposits
- Providing tactile and sensory effects
- Special ink applications such as Thermocromic, Conductive and Scratch Off

• Objectives

- Permits other label printers and sheetfed screen printers to enter the reel fed screen printing market with a solution that is reliable, productive and economical.
- Enable to remove production jobs from overbooked existing Galaxie by specializing the Galaxie Duo on 1 or 2 colors + Hot Stamping + Die cutting jobs + smaller productions.
- To provide the added value of silkscreen print to preprinted webs from other techniques such offset, letterpress flexo and of course digital printing.

• Advantages

- Easy to operate, user-friendliness and time of short training
- Reduced Waste
- Quick Setup
- Excellent registration accuracy weather in single pass, multiple pass or ineed overprinting preprinted webs
- Reduced investment compared to the Galaxie
- Possibility to trade-up and re invest the duo into the investment of a Galaxie

Number of print stations 2 Web width 260 mm Format: printing, foiling and diecutting 250 x 250 mm Maximum unwind diameter 600 mm Maximum rewind diameter 480 mm Register accuracy (depending upon the job) +/- 0,1 mm Running Speed (depending upon the job) 2200 strokes / hour avance 250 mm Electrical requirements (version 1) 400 V 3 PH + N - 20 KW Electrical requirements (version 2) 400 V 3 PH + N - 25 KW Compressed air requirements 6 bars § 30 Nm/h Dimensions (version 1) L 7,4 x 1,1 m Dimensions (version 2) L 8,3 x 1,1 m

	» Version 1 » Version 2

Top of the page

• General Presentation

350mm WEB WIDTH - Added value Screen Insetting Station
This machine has been designed to answer to the need of label printers who are looking to add screen printing process on rolls already printed by another process. This further step will bring added value to the labels such as matt varnish, tactile effect, security ink, smelling ink… The GALAXIE MONO is part of the SMAG GALAXIE range already composed with the GALAXIE DUO, GALAXIE CLASSIC and DIGITAL GALAXIE.

 

 

• General presentation
Letterpress rotary intermittent press. SMAG is the exclusive distributor of IWASAKI press, the most efficient of the market place. Exclusivity distributor in France

• Objectives
- Ideal for small to medium run production
- Quality and high speed production
- Best average between price and quality

• Advantages
- Strong construction
- Quick Setup
- Reduced Waste
- High Print Quality
- Servo motor controled print system
- Options include: hotstamping units, flexo varnishing units, rotary die cutting units, laminating, etc.

	LR 3	FLAT BED D SERIES
		D-250	HD-250
Color option	2-9 color	-	-
Machine speed	30~300 rpm (50m/min)	30~300 rpm	30~300 rpm
Web width	50~270 mm	50~270 mm	50~270 mm
Maximum printing dimension	250 x 200 mm	-	-
Maximum die-cut dimension	250 x 200 mm (option)	-	-
Maximum hot foil stamping dimension	-	-	250 x 200 mm
Repeat length	50~200 mm	50~200 mm	50~200 mm
Maximum web diameter	Ø 600 mm	-	-
Power source (main machine for 5 color + rotary die cut)	3 phase 200V 23kw	3 phase 200V 9kw/unit	4 phase 200V 11kw/unit
Power source (UV system)	singlee phase 200V 4 kw/1 color	-	-
Air pressure	0,6MPa	-	-
Net weight (for 5 color + rotary die cut)	5500 Kg	1400 Kg	2800 Kg

• General presentation
UV letter press intermittent printing machine.
Mechanically powered
Machine only available with 4 colours
Flat bed die cutting and waste rewinding integrated
Registration without machine stop
Main operations controlled by central panel

• Working area
- Small runs
- Perfect for second jobs

• Advantages
- Very short set up time (less than 10 mn for 4 colours)
- Very low waste
- Very low maintenance costs
- Reduced space
- The convenient help machine for your customers

Color option 4 colors only Machine speed 50~200 rpm (24m/min) Web width 50~180 mm Maximum printing dimension 170 x 120 mm Maximum Repeat length 200 mm (The unit position can not be adjusted, depending on design with more than 120 mm feeding length.) Maximum web diameter Ø 450 mm Maximum die-cut dimension 170 x 120 mm Power source (main machine) 3 phase 200V 14kw Power source (UV system) 3 phase 200V 9.6kw

• General presentation
Offset rotary intermittent press. SMAG is the exclusive distributor of IWASAKI press, the most efficient of the market place. Exclusivity distributor in France

• Objectives
- Production for medium to long run
- Quality and speed of print
- Both Wet and Dry offset versions

• Advantages
- Robust Construction
- Simple set up
- Reduced waste
- High Print Quality
- High press performance
- Full servo control for registration and control
- Options include: Hot Foiling unit, flexo unit, Rotary diecutting, laminating etc...

LR 25 D DH 250 Web width : mini-maxi 50 - 270 mm 50 - 270 mm 50 - 270 mm Maximum print format 250 x 200 mm     Maximum diecutting format 250 x 200 mm     Maximum foiling format - - 250 x 250 mm Press Speed 30 - 300 rpm 30 - 300 rpm 30 - 300 rpm Number of colours 1 to 7 colors     Electrical requirements 13 KW 6 KW 7 KW

Top of the page